Parabolic Antenna Super High Performance NPX5-SHP-4FT

Antennas for backhaul in urban or rural areas with high interference.

NPX5-HP-4FT Antenna

NetPoint's NPX5-SHP Super High Performance series offers Super High Performance parabolic antennas designed to provide radiation pattern performance at 4.9 to 6.4 GHz with exceptional front-to-back ratio, excellent gain 37 dBi in dual polarization, and excellent VSRW performance. NPX5-SHP dishes include high-performance radomes. A feature of these models is that they include a stiff arm between a cost-benefit balance and a reliable backhaul link.

Datasheet NPX5-SHP-4FT

NetPoint NPX5-SHP-4FT highlights

Technical Specifications

Frequency Range

The NPX5-SHP operates within the 5 GHz (4.9-6.4 GHz) frequency range, minimizing interference from other devices and ensuring optimal performance.

Antenna Gain

Boasting a high gain of up to 37 dBi, the NPX5-SHP optimizes signal reception and transmission for an extended range and improved RSSI.

Dual - Polarized

With dual linear polarization, the NPX5 enhances signal reliability, reducing the likelihood of signal degradation due to polarization mismatch.

Connector Type

The antenna features a robust N-type female connector, ensuring secure and stable connections to your WISP equipment.

Mounting Options

The NPX5-HP offers versatile mounting options, allowing for easy installation on poles or walls, adapting to the specific requirements of your network setup.

NPX5-SHP-4FT Beamwidht

Netpoint's NPX5-HP-4FT is a highly directional antenna that has a 3° beamwidth for more stable and reliable communication.

Stiff arm, lightweight and Pre-assembled

Each of your NetPoint deployments must be fast, so your antenna will arrive pre-assembled and with a stiff arm for stability, and your antenna will be lightweight.

High compatibility

Netpoint NPX5-SHP-4FT is an antenna compatible with radio units: Mimosa Networks, Ubiquiti, Cambium Networks, Radwin, Telrad and others.

NPX5-HP-3FT

Ready to install

Mounting and millimetric adjustment of NPX5-HP parabolic antennas

We upgraded some of our components to improve stability and maximize the performance of our NPX5-HP antennas, and we can now integrate a stiff arm. A lighter fine-tuning, stainless steel hardware, and a thinner lifting turnbuckle were added as our armature became even lighter.

Technical Data

The best antennas are distinguished by their mechanical - electrical functions. They facilitate the technicians working at height and in compliance with the international maintenance standards. NPX5 upgrades were based on the recommendations of our clients who are looking forward to improving our products.

New improvements / Electrical specification

Deeper Design

We redesigned and slightly increased the depth of our NPX antennas to add gain and enhance energy by optimizing the VSRW and closing the secondary lobes to grant a greater beam width, thus there is more efficiency in the central lobe.

Profundidad

We made our beam width more efficient

To enhance the beam width, we granted a greater firing efficiency to further optimize the front to back. This established a more stable communication in the backhaul links in the extended band from 4.9 to 6.4 GHz.

Radiation pattern optimization to hit the center lobe of
NPX5-SHP-4FT antennas

A stable gain over the entire band, NPX5-SHP-4FT antenna gain graph in dBi.

Superflex Jumper NetPoint N - SMA (NP142)

Superflex Jumper Netpoint NP142 SMA, is a 30 cm copper coaxial cable with 96% silver plated double mesh shielding, Teflon TFE insulation with SMA male 0.1 dBi loss, ideal for Ubiquiti radios, Mimosa Networks, Cambium Networks this is the cable that you will receive in your antennas. A flexible jumper ready to use up to 8 GHz.

• 50 Ohms Impedance

• Consistent V.S.W.R. performance and Low Passive Intermodulation (PIM) results in fewer dropped calls and a better performing network

•UV resistant