NetPoint´s
NP5-DP-3FT (NP2GEN2)

About NetPoint´s NP5-DP-2FT (NP1GEN2)

About NetPoint´s
NP5-DP-3FT 

The NP5-DP-3FT (NP2GEN2) is a parabolic antenna designed for point-to-point communications by directing the waves to the receiver at its focal point through a parabolic reflector. This antenna has a high gain of 34 dBi and operates at a frequency ranging from 4900 to 6400 MHz. The antenna is highly directional, which means that it receives more power in a specific direction, has an N female connector and has N - RPSMA jumpers for connectorized radios. Its main application is for Backhaul and CPE.

Datasheet NP5-DP-3FT
NetPoint NP5-DP-3FT highlights 
NP5-DP-3FT Beamwidht

Netpoint's NP5-DP-3FT is a highly directional antenna that has a 3.8° beamwidth for more stable and reliable communication.

NP5-DP-3FT
light-weight

Netpoint's NP5-DP-3FT is a light-weight, low-profile antenna ideal for the wireless ISP operator industry.

Dual - Polarized

Netpoint's NP5-DP-3FT is a dual polarized V/H or ±45°  slant adjustment and Includes N-Male to SMA Reverse male Jumper.

High compatibility 

Netpoint NP5-DP-3FT is an antenna compatible with radio units: Mimosa Networks, Ubiquiti, Cambium Networks, Radwin, Telrad and others.

Technical Data

Datasheet, radiation patterns and application

Mobirise

Backhaul - CPE

Optimización de patron de radiación para acertar en el lóbulo central de las antenas NP1GEN2

Radiation pattern optimization to hit the center lobe of NP1GEN2 antennas

Gain NP5-DP-2FT

A stable gain over the entire band, NP1GEN2 antenna gain graph in dBi.

Netpoint NP1GEN2
Jumper NP142 N - SMA

Superflex Jumper NetPoint N - SMA (NP142)

Superflex Jumper Netpoint NP142 SMA, is a 30 cm copper coaxial cable with 96% silver plated double mesh shielding, Teflon TFE insulation with SMA male 0.1 dBi loss, ideal for Ubiquiti radios, Mimosa Networks, Cambium Networks this is the cable that you will receive in your antennas. A flexible jumper ready to use up to 8 GHz.

• 50 Ohms Impedance

• Consistent V.S.W.R. performance and Low Passive Intermodulation (PIM) results in fewer dropped calls and a better performing network

•UV resistant

Mobirise

Netpoint 
ARNP5 Radome

NetPoint Cover Radome NP5-DP-2FT

NetPoint
RDNP-Radome 

FAQs Antennas NP5-DP Antenna Models

  • NP5-DP-2FT with which radio can be used? Our NPGEN2 antennas are compatible with connectorized radio brands such as: Mimosa Networks, Cambium Networks, Radwin, Ubiquiti, Mikrotik among others. Also remember that the operating frequency is from 4.9 to 6.4 GHz. 
  • Does the NP5-DP antenna have pigtails or jumper? Yes, it is important to remember that our antenna gives you a pair of jumpers model NP142 N to SMA input in case you require N to N jumper we invite you to request them to your distributor.
  • Do I need to register my antenna once I have made the purchase? Yes, we want you to register your antennas to support you in the future with technical support and make your warranty process easier (registration link).
  • Is it compatible to use a NP5-DP antenna with a NPX5-HP or NPTR5-DP? Yes, you can use the combinations in different scenarios where your studio requires it as long as your radio is the same there are great possibilities, however the results may vary. 
  • What accessories can I use on the NP5-DP antennas? Today we have made some accessories with which you can make more professional links, for example you can shield your antennas with NetPoint armor, apply the windbreak radome in places where it is required to protect your towers and even put the new stabilizer arm that we have created the SANP model.
Logo NetPoint 2023
Company
Contacts

Social media

© Copyright 2024 NetPoint Antennas - All Rights Reserved